[Eski] CME UF80 - Studiologic VMK 188 Plus

Bu başlık 2011 ve öncesi açılmış Müziktek Forumu başlıklarından biridir

Dream_Gypsy

Yeni üye
Merhabalar,

Yakın zamanda 88 tuşlu ve piyano tuşeli bir master klavye almak istiyorum. Bu iki modeli deneyen, ya da fikri olan varsa ve paylarşırsa çok sevinirim. Yakın zamanda İstanbula'a gelme ihtimalim çok olmadığı için denemeden alma ihtimalim olabilir. Tuşe olarak tercihim Korg SP200 ya da Yamaha P70 gibi daha yumuşak ve "spongy" değil, aksine bendeki P250 gibi daha ağır ve mümkünse "graded" tuşlar. Herkese şimdiden teşekkür ederim.
 
Merhaba Dream_Gypsy,

VMK188 plus'ı denemedim fakat geçen hafta bir CME UF80 aldım. Tuşesinden çok memnunum (uzun yıllardır piyano çalıyorum).
Bildiğim kadarıyla Yamaha tuşe sistemini CME'ye yaptırıyor.
Ama dediğim gibi Vmk'yı denemedim. Ayrıca şunu da bil: Fatar İtalyan; Cme ise Çin malı.
Ancak UF 80 in tuşesi gerçekten çok yumuşak ve hassasiyeti de oldukça iyi.
Tabi şunu da düşün; midi klavyeler ne olursa olsun digital piyanolar kadar uzun ömürlü olmuyor...
Yine de deneme imkanı yaratmaya çalış derim, tabi ki karaar senin.
 
Son konustugumuzda Tugan daha klavye almamisti.
Simdiye kadar cme nin agir tuseli klavyeleriyle ilgili tek bir kotu yorum duymadim ama nedense ben begenemedim :roll: Azicik kendimden supheleneye baslayacagim 8)
Sanirim benim memnuniyetsizligimde enstrumanin bilgisayara wireless baglanmis olmasinin payi da buyuk. Az da olsa bir miktar latency vardi, enstruman bekledigim tepkiyi vermedi.

VMK, uf 80 e gore biraz daha sert tusesi var, fakat aradaki fark cok az bir fark.
Ote yandan uf 80 gercekten devasa boyutlarda bir enstruman, uzerine kirlent ortu atsan, salonda dururken insanlar kanepe bile zannedebilirler, o derece buyuk yani :)
 
Edi teşekkür ederim yorum için, ancak alamadım henüz, malum kriz koşulları. Beni de düşündüren CME'nin Çin malı olması zaten, yoksa herkes beğeniyor. Malzeme kalitesiyle ilgili ciddi şüphelerim var, ayrıca biraz araştırma yaptım internette, bazlarının klavyesi sorunsuz çalışmış, ancak bir çoğu ciddi problemler yaşamış, bu da seri üretimdeki hatalı ürün yüzdesinin yüksekliğine işaret sanırım. Maddi durumlar düzelince İstanbul'a uğrayıp ikisini de denemek en mantıklısı galiba.

VMK188plus denemiş ve bir fikri olan insanları dinlemeye hala açığım bu arada :)
 
edi' Alıntı:
Bildiğim kadarıyla Yamaha tuşe sistemini CME'ye yaptırıyor.

Cık. Yamaha ile CME arasında sadece Amerika'da bir pazarlama stratejisi var(di), bir de CME modelleri Yamaha mLan teknolojisi kullanabiliyordu o kadar.

Yamaha Assumes U.S. Distribution of CME Products
Yamaha Corporation of America is now distributing and marketing digital music equipment manufacturer Central Music Company's (CME) products in the United States. CME has been a major importer and distributor for many of top music production brands in the Chinese market. The company was also the distributor for Yamaha music production products in China until April 1, 2005, when Yamaha founded its own Chinese subsidiary.

Since 1993, Central Music Co. has developed its own line of products, manufactured and sold under the CME brand name. Products include the UF Series, VX Series and U-Key MIDI master controller keyboards, the Matrix Series audio modules, the Xcorpio USB audio interface and the BitStream3x advanced MIDI controller.
 
Yeni farkettim, UF80'in altı sunta gibi birşeyden yapılmış. Tamam nasıl olsa kasanın altına bakmıyoruz ama ne bileyim. "Sağlam alüminyum kasa" deyip altına sunta çakılınca bana malzemeden çalınmış hissi verdi.
Paylaşmak istedim...
 
fatar vmk188+ ve numa nano karşılaştırması yapabilir misiniz rica etsem? akalın müzik, kampanyayla numa nanoyu vmk188+'in bile altına indirmiş. (VMK+ : 519 , Numa Nano : 460 Euro) . daha iyiyse daha ucuza almak cazip.

Numa Nano tuşesi diğer nano modelleri tuşe dizaynından farklı vs. gibisinden.
Teşekkürler.
 
vmk188+ hakkında youtube'de videolarına ulaşabileceğiniz birçok kişiyle konuştum.. onlardan birinin izlenimleri şöyle;

"ok here is something about the VMK.
I wanted to have a piano substitute for my own room and therefore I tried that Fatar after I read some good reviews about it and I bought it some time ago.
Well I'm very happy with it. The feeling is very nice and with a good piano software you'll get a really realistic feeling with this keyboard :)
especially when you play pianissimo passages .

the weaknesses of this keyboard are the faders, buttons and knobs. they are very easy to assign though (you just have to go to the EDIT mode, press a button or a pedal or move a fader and you can assign the MIDI messages) but they are manufactured quite cheaply .. they are numbered but nevertheless you often lose the overview, what knob you assigned with what specific function...
but you can write a note or something that you stick on your keyboard ;)
and it has no transpose function or octave shift. but who needs that? xD

so this keyboard isn't really useful to control huge amounts of racks etc.
for that purpose I would use another keyboard.

but the hammer action feels very good. when you are looking for a keyboard with a really realistic feeling but don't want to control big MIDI-equipment with it, then the VMK-188+ is the right choice ;)
I do not have any experiences with the new keyboards of Fatar but I assume they technically are as good as the VMK.

regarding the build quality: one time my keyboard stand crashed and the keyboard hit the ground very hard. everything is still fine ;) "
 
Geri
Üst